Retail outlet and online shop
Gift Sets Singing Bowls
Short Info : This is a set of Singing Bowl in Matte Finish with its cushion , stick and a red paper box pack as singing bowl box gift set.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used :7 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
5cm | 70 |
7cm | 100 |
8cm | 150 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in matte Finish with its matching cushion combination, stick and a red paper box pack as singing bowl box gift set.
Product Size :
Product Weight :
Material Used : 4 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
7cm | 200 |
8cm | 250 |
9cm | 300 |
11cm | 400 |
13cm | 600 |
15cm | 950 |
18cm | 1500 |
20cm | 2000+ |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Singing Casting Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Height Singing Bowl in Matte Finish with its matching cushion, stick and a red paper box pack as singing bowl box gift set.
Product Size :
Product Weight :
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
9cm | 400 |
8cm | 370 |
6cm | 290 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Marron Color Finish with its matching brown color cushion combination, stick and a white paper box pack as singing bowl box gift set.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Green Color Finish with its matching yellow green color cushion combination, stick and a white paper box pack as singing bowl box gift set.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Parrot Green Color Finish with its matching yellow color cushion combination, stick and a golden color nepali lokta paper box pack as singing bowl box gift set.
Product Size : 13 cm in dia
Product Weight : 650 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Brown Color Finish with its matching brown color cushion, stick and a white paper box pack as singing bowl box gift set.
Product Size : 11 cm in dia
Product Weight : 400 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Brown Color Finish with its matching brown color cushion combination, stick and a golden color nepali lokta paper box pack as singing bowl box gift set.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Blue Color Finish with its matching blue color cushion combination, stick and a golden color nepali lokta paper box pack as singing bowl box gift set.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Antique Finish with its matching red black color brocade cushion, stick and a white paper box pack as singing bowl box gift set.
Product Size : 11 cm in dia
Product Weight : 400 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Antique Finish with its matching golden black color brocade cushion, stick and a golden color nepali lokta paper box pack as singing bowl box gift set.
Product Size : 11 cm in dia
Product Weight : 400 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Glossy Bronze Finish with its matching red color cushion, stick and a paper box pack as singing bowl box gift set.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Colored Parrot Green Finish with its matching color cushion and with the wooden striker.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Colored Antique Finish with its matching color cushion and with the wooden striker.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is a set of Singing Bowl in Colored Blue Finish with its matching color cushion and with the wooden striker.
Product Size : 9 cm in dia
Product Weight : 320 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
8 cm | 250 |
9 cm | 300 |
11 cm | 400 |
13 cm | 600 |
15 cm | 950 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements