himalayansounds.com
Retail outlet and online shop
Retail outlet and online shop
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Amitabh Buddha etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Abalokeswor etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with flower of life etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with flower of life etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Green Tara and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Khadcheri and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Shakyamuni Buddha and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with yogi etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Jikche Nokpa etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Kuber etching and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with White Tara and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Medicine Buddha and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl decorated with Manjushree and antique brown finish.
Product size : 24 cm in dia
Product weight : 1800 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
Size Weight Range
Diameter Gram
18 cm 850
20 cm 1100
22 cm 1300
24 cm 1800
26 cm 2200
28 cm 2600
30 cm 3000
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info: This is Hand Beaten or Hammered Singing Bowl in dark color with a word om mane padme om in tibetian language,
Product size : 25 cm in dia
Product weight : 850 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
|
Size Diameter |
Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-31cm | 3000 |
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info : This is Hand Beaten or Hammered Singing Bowl with Tara Image hand carving inside bottom and brown colour finish.
Product Size : 22 cm in dia
Product Weight : 1500 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter | Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-31cm | 3000 |
| 35cm | 4000+ |
| 40cm | 6000+ |
| 45cm | 8000+ |
| 50cm | 10000+ |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info: This is Hand Beaten or Hammered Singing Bowl in dark color with a word om mane padme om in tibetian language, name of makers and a symbol of coin.
Product size: 25 cm in dia
Product weight: 2500 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
| Size Diameter | Weight Range grams |
| 12-13cm | 400 |
| 14-15cm | 500 |
| 16-17cm | 700 |
| 18cm | 900 |
| 20-21cm | 1500 |
| 22-23cm | 2000 |
| 24-25cm | 2500 |
| 27-28cm | 3000 |
| 30-32cm | 4000 |
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size /designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info : This is Hand Beaten or Hammered Singing Bowl with different shape and size are used as the chakra singing bowls. It includes seven bowls set of bowls.
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter | Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-32cm | 3000 |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements.
Short Info : This is Hand Beaten or Hammered Singing Bowl with antique dull old finish.
Product Size : 25 cm in dia
Product Weight : 2000 grams
Available Product Size / Weight Ranges :
| Size Diameter | Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-31cm | 3000 |
| 35cm | 4000+ |
| 40cm | 6000+ |
| 45cm | 8000+ |
| 50cm | 10000+ |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hande Beaten or Hammered Singing Bowl with a hole at centre in matte finish.
Product Size : 25cm in dia
Product Weight : 2100 grams
Material Used : Seven Metal
Available Product Size/ weight Ranges :
| Size Diameter | Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-31cm | 3000 |
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size/ designs of product.
About Beaten Hammered Singing Bowls :
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single bowl are carefully hand beaten which requires several processesto finish up and shaping into a perfect hand hammered singing bowl.
In making process, first the various composition of metals as raw materials (copper, zinc, tin, iron, lead, gold and silver) are melted into furnance depending on manufacturing needs such as for bronze singing bowls oe for seven metal singing bowl making. the hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up on one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group or expert artisian till the heat remains in metal and again processes to red heating for continuous beating foe the singing bowls shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desirsd shape and size forms from a metal sheet. ( That is why the hammered or beaten singing bowls will get propotionately difference ina size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness amd flexibility which turns tampered and gets hardness on metal and thus breaks metal or bowls if done hammered. the reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to head and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage,every bowl is brought into uniform shape and size and it should also be done br red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surfrace of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch eithr by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carving, antique finishing, coloring, paintings and engraving with art works and designs.
Therefore the making of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, chakra balancing, sound therapy, sound massage, healing, water therapy. space clearing and feng shui. It produces a very special rimming and distinct sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls can be decorated with various carvings and paintings which reflects religious beliefs and values like hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mane Padme Hum tibetian mantra, Dragon Design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand paintings and eitching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the moniter's resolutions and VGA diaplay cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the product Inquiry form with yor detail enquiries/requirements.
Short Info : This is Hand Beaten or Hammered Singing Bowl decorated with chakra etching and brown finish.
Product Size : 22 cm in dia
Product Weight :1500 grams
Material Used : Seven Metal
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
Available Product Size / Weight Ranges :
| Size Diameter | Weight Range grams |
| 12-13 cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-31cm | 3000 |
| 35cm | 4000+ |
| 40cm | 6000+ |
| 45cm | 8000+ |
| 50cm | 10000+ |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info: This is Hand Beaten or Hammered Singing Bowl in dark color with Half Buddha etching and antique brown finish.
Product size: 25 cm in dia
Product weight: 2000 grams
Material Used: Seven Metal
Available Product Size / Weight Ranges:
| Size Diameter | Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-32cm | 3000 |
| 35cm | 4000+ |
| 40cm | 6000+ |
| 45cm | 8000+ |
| 50cm | 10000+ |
Minimum Level Order Quantity : 10 Pieces or 15 kilogram per order per size designs of product.
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or foe seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and size bowls.
Regarding hand hammering process of singing bowls making, 4-5 round metal sheets are piled up one upon another and then heated to red hot burn. the red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet.(That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensative to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. so in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand Hammered or beaten singing bowls making process movie clips from our factory premises.
After the completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. The individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface acording to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothing process for giving the finish touch either by hand sanding (Matte Finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
These Singing bowls are again sent for other processes like hand carving, antique finishing, coloring, painting and engraving wuith various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Aspicious symbols, Om Mani Padme Hum Tibetian Mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Lotus Designs with various colors and hand painting and etching for better looks and decorations.
Note: The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form your detail enquiries/requirements.
Short Info : This is Hand Beaten or Hammered Singing Bowl decorated with flower of life etching and antique brown finish.
Product Size : 28 cm in dia
Product Weight : 2500 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter | Weight Range grams |
| 12-13cm | 350 |
| 14-15cm | 400 |
| 16-17cm | 600 |
| 18cm | 800 |
| 20-21cm | 1100 |
| 22-23cm | 1500 |
| 24-25cm | 2000 |
| 27-28cm | 2500 |
| 30-31cm | 3000 |
| 35cm | 4000+ |
| 40cm | 6000+ |
| 45cm | 8000+ |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Dragon Carving outside and Double Dorje bottom hand carving with various other decorated carving in Antique Brown finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl in Glossy plain finish
Product Size : 18 cm in dia
Product Weight : 850 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Green Tara Buddha Image hand carving inside bottom in Matte finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Shree Yantra hand carving inside bottom in Matte finish
Product Size : 20 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Vairochana Buddha Image hand carving inside bottom in Matte finish
Product Size : 20 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Item Code : BO718KM
Short Info : This is Hand Beaten or Hammered Singing Bowl in Gulpa design in Matte finish
Product Size : 18 cm in dia
Product Weight : 850 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Thick edge or border in Matte finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl in Matte finish
Product Size : 25 cm in dia
Product Weight : 2100 grams
Material Used : Seven Metal
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with outside hammered mark visible in Matte dull finish.
Product Size : 45 cm in dia
Product Weight : 8000 grams
Material Used : Seven Metal
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with outside hammered mark visible in dull old finish.
Product Size : 45 cm in dia
Product Weight : 8200 grams
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl in yellowisn golden color finish
Product Size : 30 cm in dia
Product Weight : 3000 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl in yellowisn golden color finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl in brown pattina color finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Om Mani Padme Hum mantra carving outside and Double Dorje bottom hand carving with various other decorated carving in Antique Brown finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Eight Auspicious Symbols AstaMangal carving outside and Double Dorje bottom hand carving with various other decorated carving in Antique Brown finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Manjushree Image hand carving inside bottom in Matte finish
Product Size : 21 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Amitabha Buddha Image hand carving inside bottom in Matte finish
Product Size : 20 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Vairochana Buddha Image hand carving inside bottom in Matte finish
Product Size : 25 cm in dia
Product Weight : 2100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Shakyamuni Buddha Image hand carving inside bottom in Matte finish
Product Size : 25 cm in dia
Product Weight : 2100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Hand Beaten or Hammered Singing Bowl with Medicine Buddha Image hand carving inside bottom in Matte finish
Product Size : 20 cm in dia
Product Weight : 1100 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
| Size Diameter |
Weight Range grams |
| 12 - 13 cm | 350 |
| 14 - 15 cm | 400 |
| 16 - 17 cm | 600 |
| 18 cm | 800 |
| 20 - 21 cm | 1100 |
| 22 - 23 cm | 1500 |
| 24 - 25 cm | 2000 |
| 27 - 28 cm | 2500 |
| 30 - 31 cm | 3000 |
| 35 cm | 4000 + |
| 40 cm | 6000 + |
| 45 cm | 8000 + |
| 50 cm | 10000 + |
Minimum Level Order Quantity : 10 Pieces or 15 Kilogram per order per size/designs of Product
About Beaten Hammered Singing Bowls:
Beaten or hand hammered singing bowls are made by complete hand hammering process. In beaten singing bowls, every single singing bowl are carefully hand beaten which requires several processes to finish up and shaping into a perfect hand hammered singing bowl.
In the making process, first the various composition of metals as raw materials (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. The hot melted metal are taken from furnace and poured into a Gulli Cup or Dice to prepared metal mould for the various size and weight. Then, the round metal gulli or moulds are taken to make rolling and turn into round metal sheet in needed size and thickness. After that, the sheet are brought for the hand beating or hammering process after precise measurement and categorized for weight and sized bowls.
Regarding hand hammering process of singing bowls making, 4 -5 round metal sheets are piled up one upon another and then heated to red hot burn. The red hot burned metal sheets are hammered from a group of expert artisan till the heat remains in metal, and again processes to red heating for continuous beating for the singing bowl shaping. This heating and beating process with the bundled and piled up metal sheets continues until a desired shape and size forms from a metal sheet. (That is why the hammered or beaten singing bowls will get proportionately difference in a size centimeter with each individual singing bowl).
In hammering process of these singing bowls, the metal sheet must hammer and beating on the time of red hot only which remains softness and flexibility on the metal, this is because as the metal getting colder, will loose its softness and flexibility which in turns tampered and gets hardness on metal, and thus breaks metal or bowl if done hammered. The reason behind this working process is the metal content Bronze or Seven Metal mixture is very sensitive to heat and gets harder if it looses it hot temperature and will have cracks and breaks if works. So in this shaping stage of hammered singing bowls, the makings are done with the duration of hot metal only.
Hand hammered or beaten singing bowls making process movie clips from our factory premises
After completion of gaining desired bowls shaping, the individual works start with the making process. At this making stage, every bowl is brought into uniform shape and size and it should also be done by red burning and heating process and then beating. After finalizing the shape and size, hammering is done for final fine tuning and shaping of singing bowls. Then individual singing bowls are then chiseled and made turning the rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs.
After this process, the hammered singing bowls are processed for cleaning and smoothening process for giving the finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish, and finally singing bowls are produced and ready to sell and release for the market.
As per needed, these singing bowls are again sent for other process like hand carvings, antique finishing, colorings, paintings and engraving with various arts works and designs.
Therefore, the makings of hand beaten or hammered singing bowls are very labor intensive work and require very skillful artisans with highly experience and dedication.
The hand hammered or beaten singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing and feng shui. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Double Dorje Carvings, Various Mandalas, Louts Designs with various colors and hand painting and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements