Retail outlet and online shop
Short Info: This is Casting Gulpa Singing Bowl decorated with hammer marked in matte bronze finish.
Product Size: 13 cm in dia
Product Weight : 1000 grams
Material Used: Seven Metal
Available product Size/ Weight Ranges:
Size Diameter | Weight range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm flat | 550 |
12cm flat | 700 |
13cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Eight Auspicious Symbols carving and Dorje carving with variouws design in silver wash finish.
Product Size : 12 cm in dia
Product Weight : 780 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Daimeter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Buddha Eye outside and Lotus design inside in brown antique finish
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Lotus Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl in big size decorated with Dragon and Double Dorje Hand Carvings and various other fine flower outside singing bowl in brown antique finish.
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 500 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements.
Short Info : This is Casting Gulpa Singing Bowl decorated with Dragon carving and Dorje carving with variouws design in silver wash finish.
Product Size :13 cm in dia
Product Weight : 1000 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements.
Short Info : This is Casting Gulpa Singing Bowl decorated with Dragon carving and Dorje carving with variouws design in silver wash finish.
Product Size : 12 cm in dia
Product Weight : 780 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Flower and Astamangal outside and Buddha inside in brown antique finish
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements.
Short Info : This is Casting Gulpa Singing Bowl in big size decorated with Om Mani Padme Hum and Double Dorje Hand Carvings and various other fine flower outside singing bowl in brown antique finish.
Product Size : 12 cm in dia
Product Weight : 800 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements.
Short Info : This is Casting Gulpa Singing Bowl in big size decorated with Dragon and Double Dorje Hand Carvings and various other fine flower outside singing bowl in brown antique finish.
Product Size : 12 cm in dia
Product Weight : 800 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter | Weight Range grams |
11cm | 600 |
12cm | 800 |
13cm | 1000 |
15cm | 1500 |
20cm | 2500 |
11cm Flat | 550 |
12cm Flat | 700 |
13cm Flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product.
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements.
Short Info : This is Casting Gulpa Singing Bowl with Lotus Design inside in brown antique finish
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl with Lotus Design inside in glossy finish
Product Size : 15 cm in dia
Product Weight : 1350 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
<p>Available Product Size / Weight Ranges :</p>
<table style="height: 173px; border-color: #383838;" border="2" width="297">
<tbody>
<tr>
<td style="width: 140.5px;">Size<br />Diameter</td>
<td style="width: 140.5px;">Weight Range grams</td>
</tr>
<tr>
<td style="width: 140.5px;">11 cm</td>
<td style="width: 140.5px;">600</td>
</tr>
<tr>
<td style="width: 140.5px;">12 cm</td>
<td style="width: 140.5px;">800</td>
</tr>
<tr>
<td style="width: 140.5px;">13 cm</td>
<td style="width: 140.5px;">1000</td>
</tr>
<tr>
<td style="width: 140.5px;">15 cm</td>
<td style="width: 140.5px;">1500</td>
</tr>
<tr>
<td style="width: 140.5px;">20 cm</td>
<td style="width: 140.5px;">2500</td>
</tr>
<tr>
<td style="width: 140.5px;">11 cm flat</td>
<td style="width: 140.5px;">550</td>
</tr>
<tr>
<td style="width: 140.5px;">12 cm flat</td>
<td style="width: 140.5px;">700</td>
</tr>
<tr>
<td style="width: 140.5px;">13 cm flat</td>
<td style="width: 140.5px;">860</td>
</tr>
</tbody>
</table>
<p>Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product<br />About Casting Singing Bowls:<br />Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.</p>
<p>In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.</p>
<p>The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.</p>
<p>The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.</p>
<p>And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.</p>
<p>In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.</p>
<p>These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.</p>
<p>These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.</p>
<p>Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.<br />For further product queries, please do e-mail at info@thesingingbowls.com<br />or just submit the Product Inquiry Form with your detail enquiries/requirements</p>
<p> Product Inquiry Form with your detail enquiries/requirements</p>
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Lotus Om outside andOm mandala design inside in brown finish
Product Size : 12 cm in dia
Product Weight : 700 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Lotus Om outside andOm mandala design inside in brown finish
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Lotus Om outside and 4 Buddha design inside in brown finish
Product Size : 15 cm in dia
Product Weight : 1350 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Lotus Om outside and 4 Buddha design inside in brown finish
Product Size : 11 cm in dia
Product Weight : 550 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Lotus Om outside andOm mandala design inside in brown finish
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl with Double Dorje Inside in Glossy Finish
Product Size : 15 cm in dia
Product Weight : 1350 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Double Dorje outside and 4 Buddha design inside in brown finish
Product Size : 12 cm in dia
Product Weight : 700 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Asta Mangal Eight Auspicious Symbols and Chinese Symbol with lotus outside and Double Dorje design inside in brown finish
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Buddha Eye outside and 4 Buddha design inside in brown finish
Product Size : 11 cm in dia
Product Weight : 550 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Buddha and Buddha Eye outside and Om Mandala design inside in brown antique finish
Product Size : 12 cm in dia
Product Weight : 700 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Double Dorje outside and 4 Buddha design inside in brown antique finish
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra, Dragon and Om Mandala outside and Double Dorje design inside in brown antique finish
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : 7 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl in big size decorated with Dragon and Double Dorje Hand Carvings and various other fine flower outside singing bowl in brown antique finish.
Product Size : 20 cm in dia
Product Weight : 2500 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl in big size decorated with Asta Mangala Eight Auspicious Symbols and Double Dorje Hand Carvings and various other fine flower outside singing bowl in brown antique finish.
Product Size : 20 cm in dia
Product Weight : 2500 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl in big size decorated with Om Mani Padme Hum and Double Dorje Hand Carvings and various other fine flower outside singing bowl in brown antique finish.
Product Size : 20 cm in dia
Product Weight : 2500 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Buddha Eye outside and Lotus Buddha Eye design inside in black antique finish
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : 7 Metal
<p>Available Product Size / Weight Ranges :</p>
<table style="height: 173px; border-color: #383838;" border="2" width="297">
<tbody>
<tr>
<td style="width: 140.5px;">Size<br />Diameter</td>
<td style="width: 140.5px;">Weight Range grams</td>
</tr>
<tr>
<td style="width: 140.5px;">11 cm</td>
<td style="width: 140.5px;">600</td>
</tr>
<tr>
<td style="width: 140.5px;">12 cm</td>
<td style="width: 140.5px;">800</td>
</tr>
<tr>
<td style="width: 140.5px;">13 cm</td>
<td style="width: 140.5px;">1000</td>
</tr>
<tr>
<td style="width: 140.5px;">15 cm</td>
<td style="width: 140.5px;">1500</td>
</tr>
<tr>
<td style="width: 140.5px;">20 cm</td>
<td style="width: 140.5px;">2500</td>
</tr>
<tr>
<td style="width: 140.5px;">11 cm flat</td>
<td style="width: 140.5px;">550</td>
</tr>
<tr>
<td style="width: 140.5px;">12 cm flat</td>
<td style="width: 140.5px;">700</td>
</tr>
<tr>
<td style="width: 140.5px;">13 cm flat</td>
<td style="width: 140.5px;">860</td>
</tr>
</tbody>
</table>
<p>Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product<br />About Casting Singing Bowls:<br />Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.</p>
<p>In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.</p>
<p>The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.</p>
<p>The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.</p>
<p>And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.</p>
<p>In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.</p>
<p>These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.</p>
<p>These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.</p>
<p>Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.<br />For further product queries, please do e-mail at info@thesingingbowls.com<br />or just submit the Product Inquiry Form with your detail enquiries/requirements</p>
<p> Product Inquiry Form with your detail enquiries/requirements</p>
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mantra and Endless Knot outside and Buddha Eye design inside in black antique finish
Product Size : 12 cm in dia
Product Weight : 780 grams
Material Used : 7 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Height Singing Bowl decorated with Dragon and Double Dorje with various carvings design outside and om mani mandala inside in brown antique finish.
Product Size : 11 cm in dia
Product Weight : 600 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Asta mangal eight auspicious symbol, flower and Double Dorje outside and 4 buddha inside with various carvings design in brass plating with brown pattina finish.
Product Size : 13 cm in dia
Product Weight : 850 grams
Material Used : 4 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Om Mani Mantra with Buddha Eye outside and Lotus with Double Dorje design inside in black finish.
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : 7 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Height Singing Bowl decorated with Asta mangal eight auspicious symbol and Double Dorje with various carvings design in matte bronze finish.
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Dragon and Buddha Eye outside and Lotus design with symbol inside in black finish.
Product Size : 11 cm in dia
Product Weight : 1000 grams
Material Used : 2 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with Dragon carving and Dorje carving with variouws design in brown antique finish.
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with flower brass plating and Dorje design inside in silver wash finish.
Product Size : 11 cm in dia
Product Weight : 600 grams
Material Used : 4 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with flower copper plating and Dorje design inside in brown antique finish.
Product Size : 11 cm in dia
Product Weight : 600 grams
Material Used : 4 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with flower copper plating and Dorje design inside in black finish.
Product Size : 11 cm in dia
Product Weight : 600 grams
Material Used : 4 Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements
Short Info : This is Casting Gulpa Singing Bowl decorated with eight auspicious symbols asta mangala and Double Dorje with various plating of brass, copper and silver plating in brown with multicolor finish.
Product Size : 13 cm in dia
Product Weight : 1000 grams
Material Used : Seven Metal
Available Product Size / Weight Ranges :
Size Diameter |
Weight Range grams |
11 cm | 600 |
12 cm | 800 |
13 cm | 1000 |
15 cm | 1500 |
20 cm | 2500 |
11 cm flat | 550 |
12 cm flat | 700 |
13 cm flat | 860 |
Minimum Level Order Quantity : 10 Pieces or 10 Kilogram per order per size/designs of Product
About Casting Singing Bowls:
Casting Singing Bowls are produced by metal casting process with the technique of sand casting method. For sand casting purpose, the master mould are prepared from the master dice of desired size and shaped singing bowl with the use of sand, clay and dice.
In Casting Singing Bowls making process, first the various composition of metals (Copper, Tin, Zinc, Iron, Lead, Gold and Silver) as raw materials are melted into furnace depending on manufacturing needs such as for bronze singing bowl or for seven metal singing bowl making. In this casting singing bowls making process the mixture of various metal combination according to product needs are turned into metal gulli, ingots and metal silly or biscuits to make available for small casting or directly melting as raw materials like scrap metals (copper, tin etc, cracked or damaged singing bowls) dividing their percentage of metal mix for casting.
The prepared red hot melted metal are poured into the casting mould ready for sand casting. After few minutes of pouring the metal are turned into desired shape and size of singing bowls in rough finish according to mould prepared. And each time the master artisan has to prepare a master mould for the next lot of sand casting process of singing bowls. Each mould will have a capacity to produce a single bowl to 4 singing bowls one at a time of sand casting depending on sizes required.
The individual singing bowls are then chiseled, made turning and smoothening rough surface of singing bowls for fine finishing and looks from inside and outside surface according to finishing needs. After then, bowls are processed for giving final finish touch either by hand sanding (matte finish) or by buffing or polishing for glossy finish and finally singing bowls are produced and ready to sell and release for the market.
And as per needed, these singing bowls are sent for other process like hand carvings, antique color finishing, colorings, paintings and etching process.
In this sand casting making process of singing bowls, the singing bowls produced will have uniform shape and size and produced fast in making. These casting process are done for producing Flat Design (Manipure Shape) Singing Bowls, Gulpa Shape (Begging Bowl) Singing Bowls, Height (Cylinder Shape) Singing Bowls, Japanese Design Singing Bowls.
These casting singing bowls are widely popular for meditation, charka balancing, sound therapy, sound massage, healing, water therapy, space clearing, feng shui, decoration and gift sets. It produces a very special rimming and distinct sound and vibration than other types of singing bowls. But the sound and vibration produced will be different with the shape, size, weight and thickness of the singing bowls.
These singing bowls also can be decorated with various carvings and paintings which reflects religious beliefs and values like the hand carving of Buddha Images, Buddhist Deities and Motifs, Eight Auspicious Symbols, Om Mani Padme Hum tibetan mantra, Dragon design, Buddha Image and Eye and Motifs Double Dorje Carvings, Various Mandalas, Louts Designs, Ying Yang and with various colors and hand painting, platings and etching for better looks and decorations.
Note : The color depth of the products images will be slightly variable due to the monitor's resolutions and VGA display cards and so may have slight difference with the real products.
For further product queries, please do e-mail at info@thesingingbowls.com
or just submit the Product Inquiry Form with your detail enquiries/requirements
Product Inquiry Form with your detail enquiries/requirements